color laser printer 구입. usb 와 network 로 연결이 가능한 모델.
airport express usb 포트에 연결함.
iMac 에서 저절로 잡히고 프린트 잘 된다.
windows XP 에서는 airport express 구입 당시의 설치 CD 를 넣어서 지시대로 하면 된다고 함 -> 별로 하는 게 없어 보인다.
찾아보니까 Bonjour 를 설치하라고 해서 apple 사이트에서 다운받아서 설치함. Bonjour 프린터 위저드가 생성된다. 이것을 구동하면 프린터를 찾기는 한다. 그런데 generic 프린터로 인식한다. device driver 가 없다는 것.
그래서 device driver 를 프린터 설치 CD 로 설치하려고 하니까 일단 직접 연결이나 네트워크 연결이 되어야 한다. HP 사이트에서 제공하는 driver 도 마찬가지. 결국 USB 로 직접 연결하여 설치함. HP software update 까지 설치해서 최신 driver 라는 것을 확인했다.
그 다음 Bonjour printer wizard 를 다시 실행함. 이상하게 여전히 처음에는 generic 으로 인식하는데 '뒤로' 버튼을 누르면 제대로 device driver 를 선택할 수 있는 창이 뜬다. 여기에서 선택함.
이 정도면 다 됐을 줄 알았는데, 프린트를 시키면 오류 메시지가 나오면서 프린트가 안 된다.
그러다가 appleforum 에서 찾은 해결책 (다른 일로 AEBS (AirPort Extreme Base Station)를 키워드로 찾다가 걸린 쓰레드. AEBS 나 AirPort Express 나 같은 해결책을 사용한다.):
http://hints.macworld.com/article.php?story=2003072510530643
I decided to upgrade my old router and get an Airport Extreme base station. I was looking forward to being able to share my Epson Stylus 760 off the USB port but didn't know if my XP PC would be able to use it. After much searching, I found these instructions and all is well:
Make sure the printer is recognised by the base station.
Select 'Add a new printer' in Windows
Select 'Local Printer' in the dialog box (auto detect and install should be off), click next.
Choose 'Create a new port' and "Standard TCP/IP Port'. Click next.
For the printer IP address, enter the address of the base station ie. 10.0.1.1. The port name will be filled automatically. Click next.
For the device type, choose 'Hewlet Packard Jet Direct', then click Finish.
Choose your printer from the list and follow the rest of the prompts to install and configure the driver.
I can't guarantee that this will work on anything other than XP so YMMV.
훨씬 더 자세히 나와 있는 곳은 다음과 같다. 헷갈릴 만한 부분에서의 선택사항은 device type 을 custom 으로 선택하는 것과 공유 프린터로 하지 않는 것이다.
http://tech.ifelix.net/1004.html
내가 할 때는 port 생성시 Standard TCP/IP Port 이외에 HP Standard TCP/IP Port 라는 옵션이 있어서 그것을 선택했는데 그냥 Standard .. 를 선택했어도 잘 될 것 같다.